TEST SETTINGS
VTR (Variable Test Resistance) Technology gives you all the control and
customization over your test settings. In this screen you can set the Low
and High Fail as well as our unique and powerful Near Failure adjustment
for Wrist Strap, Smock/Garment, and Footwear. You will also notice that you
can toggle display and auto detection on/off for each device.
Device Titles:
Adjust the High, Low, and Near Fail settings of each device (in Ohms).
Test Configuration:
Control various timing controls and configure how a test is performed.
Dual Wire Select:
The Dual Wire jack on the ELITE works with either a Wrist Strap or
Smock/Garment. You can select either of these options or disable the jack
input.
P5
To Next Page
Loading...