Temperature
Setting
In working status, press or for temperature setting. the
setting will be saved automatically after stopping operating for 4
seconds.
Keep holding the button, the temperature will be adjusted fastly.
(Note: the temperature displayed is the current temperature of
the compartment. it will take a while to reach the set tempera-
ture.)
Temperature setting range: -22~+10℃（-8~50℉）
The car refrigerator has a power-off memory function, and the working state (power
on/off state and working mode) before the power off is automatically restored after the
next power on, and there is no need to set it again.
Temperature Unit
Switch
In working status, press one time, the "MAX/ECO" will flash ,
then press again, you can switch MAX or ECO working mode.
If you stop the operation for seconds, it will automatically
confirm the final mode.
ECO (green light): Energy Saving Mode, 45 watts.
MAX (white light):Fasting Cooling Mode, 60 watts.
MAX/ECO Mode
Switching
In working status, press and at the same time 3~5 seconds
to switch Celsius(℃）/Fahrenheit(℉）. (Factory setting is H）.
Battery Protection
Mode
In working status, long press until the "H" flash, then press
in turn to choose HIGH, MEDIUM, or LOW levels. We suggest
setting a high level of the fridge when connect with a car battery.
To set medium and low level when with a power station or other
batteries.
Unlocking When the refrigerator does not operate for about 1 minute, the
control panel will automatically lock and be unable to operate.
You need to long-press the until the screen is unlocked, and
then you can operate again.
To Next Page
Loading...
