Boulder 1160 - Appendix; Specifications

6-1
Appendix
Appendix
Specications
Continuous Power, Each Channel
Watts Ω THD 20-2kHz THD 20kHz
300 8 0.0008% 0.0040%
300 4 0.0012% 0.0065%
300 2 0.0018% 0.0100%
Peak Power, Each Channel
Watts Ω
300 8
600 4
1200 2
Equivalent Input Noise (EIN), 20kHz BW 1.5 µV
Magnitude Response, 20 to 20KHz +0.00, -0.04 dB
Magnitude Response, -3dB at 0.015Hz, 200kHz
Voltage Gain 26dB
Input Impedance Balanced: 200kΩ,
Unbalanced 100kΩ
Common Mode Rejection (Balanced only) 60 Hz: 90dB,
10kHz: 70dB
Inputs 3-pin Balanced
Output Connectors 2 sets of 6 mm / .250 inch wingscrews
Power Requirements 100, 110-120, & 220-240 VAC
50-60 Hz, 250W nominal, 5000 W at maximum output
*All specications taken at 240 VAC mains Power