P12 /P15 /P18
Necessary Operating Materials and Chemical Additives
Dear Customer,
In order to prevent any delays in the commissioning of your Drycleaning
Machine P12 /P15 /P18, we ask you to make sure that the following operating
materials and chemical additives are available.
- Solvent
Use only stabilized, high-purity TETRACHLORETHENE (PERC), in accordance
with DIN 53978.
We recommend that only fresh solvent should be used in order to avoid
contamination through dirt, foreign substances and smells.
Total filling amount for the first filling
3-tank model:
P 12: about 280 l (about 455 kg) or about 74 US gal (about 1003 lbs)
P 15: about 330 l (about 535 kg) or about 87 US gal (about 1180 lbs)
P 18: about 380 l (about 615 kg) or about 100 US gal (about 1356 lbs)
Tank I: Minimum filling volume: P12: 60 l (15.8 US gal)
P15: 75 l (19.8 US gal)
P18: 90 l (23.7 US gal)
Tank III: Minimum filling volume: P12: 60 l (15.8 US gal)
P15: 75 l (19.8 US gal)
P18: 90 l (23.7 US gal)
For machines with 2 economy filters: + 40 l (10.5 US gal)
For machines with 2 economy filters and 1 cartridge filter: + 55 l (14.5 US gal)
- Chemical additives
The chemical additives used must be heat-resistant under operating conditions.
Please provide the following additives, depending on the equipment:
- Drycleaning detergent
- Antistatic agent
- Waterproofing agent
- Pre- and post-spotting agents
To Next Page
Loading...
