Operation
Ready Indication Setting continued.
4.
5.
Photocell
The photocell is specially designed to work under studio light conditions. Direct light or
other strong light sources may reduce the sensitivity of the cell.
The photocell has two operating modes:
trigger the XMS using the photocell source settings.
Sync Source Setting
Use the SYNC button to select the cell:
1. To select the photocell, press and hold down the SYNC button until only the
CELL Indicator is illuminated. The unit will be triggered by any
pulsed light source.
12
XMS user guide
Operation
Bowens.co.uk
To Next Page
Loading...
