15
XMS user guide
User Options
User Options
Bowens.co.uk
Pairing (Pr)
This option allows the unit to be paired or un-paired with an XMSR as well as allowing
all pairing associations to be cleared. Refer to the XMSR Radio Trigger and Remote
Control section.
Remote Channel (Ch)
This allows selection of the radio remote channel for this unit. Note that when the radio
regardless of the Group setting. Refer to the XMSR Radio Trigger and Remote Control
section.
Remote Group (Gr)
This allows the radio remote group to be selected so units can be remotely controlled
either individually or in groups. Units set to the same group can be simultaneously
controlled. Note that the master remote control can adjust settings on any unit on the
same Channel regardless of the Group. Refer to the XMSR Radio Trigger and Remote
Control section.
Pre-Flash Number (Pn):
this can be set either manually, Pn = 1-10, or learnt, Pn = 0.
Pn = 0
should be set to 0 for Auto. This will also automatically switch the photocell to the Pre-
1.
2
3.
4.
5. If no change of setting is made for 10 seconds, the display will revert to normal
new settings will be saved.
To Next Page
Loading...