User Options
Pre-Flash Number (Pn) continued:
6.
a)
b) Choose another option and then allow the options display to time out.
c)
Pn = 1 - 10
this number to be manually set.
produced by the camera.
normally adequate for most purposes. Only increase this setting when the camera pre-
detected. The time-frame value can be set between 0.5 and 8.0 seconds.
sequence to be restarted. The default value is 2ms and is normally adequate for most
purposes. This setting may sometimes need to be changed for cameras using an LED
Audible Ready Beep Period (Au)
When more than one XMS is to be used this feature can create a recognisable ‘ready’
between 15 and 90. This value (x 10) indicates the ‘ready’ beep period ranging from 150
to 900 milliseconds with a default period of 350 milliseconds.
16
XMS user guide
User Options
Bowens.co.uk
To Next Page
Loading...
