User Maintenance
Modelling Lamp Fitting
1.
and remove the mains cable from the unit.
2.
the life of the bulb.
3. Select the correctly rated modelling bulb for the local mains supply.
4.
5. Remove the new modelling bulb from its packaging by grasping the glass
bulb with a clean tissue or cloth.
6. Continue holding the bulb with the tissue or cloth and carefully screw the
Flashtube Replacement
1.
2.
grease on the glass which can shorten its life.
3.
4.
connector holes by gently rocking it from side to side.
5.
6.
7.
until fully inserted.
8.
Changing the Fuse
next to the mains input.
bulb. A spare fuse is located in the draw underneath the mains connection on the bottom
of the unit. The fuse draw contains two fuses, the furthest inside the draw is the live fuse
22
XMS user guide
User Maintenance
Bowens.co.uk
To Next Page
Loading...