User Options
Power Switch State (PS)
This option allows the last state of the Standby/Power switch to be remembered if
or 1 (On) to remember the last Power Switch state.
When set to on and power is lost and then restored, the unit will continue to operate in
the same state that it was in before the power was lost. This feature may be useful if the
unit is mounted in an inaccessible position, for instance on a HiGlide ceiling track system,
then this particular state will not be restored.
Since there can be no indication as to which state the unit will be in before power
necessary for the reason given above.
Set Defaults (dF)
This option allows all options to be set to their default values. Set this option to 1 (On) to
clear all previous settings and replace them with the default values when the options
mode is exited.
18
XMS user guide
User Options
Bowens.co.uk
To Next Page
Loading...
