Need help?Do you have a question about the Bowers & Wilkins CDM 9NT and is the answer not in the manual?
General| Type | 3-way vented-box system |
|---|---|
| Sensitivity | 90dB spl (2.83V, 1m) |
| Description | High-performance loudspeaker |
| Frequency Range | 30Hz - 50kHz |
| Nominal Impedance | 8Ω (minimum 3.7Ω) |
| Power Handling | 50W – 200W into 8Ω on unclipped programme |
| Drivers | 1x 25mm (1in) metal dome high-frequency, 1x 150mm (6in) woven Kevlar cone midrange |
| Crossover Frequency | 4kHz |
| Dispersion - Vertical | 10 degrees |
| Harmonic distortion | Less than 1% |
Steps for safely removing speakers from packaging and checking contents.
How to connect speakers to amplifier, including bi-wiring options.
Guidance on placing speakers for best listening experience and room interaction.
Warning to keep sensitive electronics away from speaker magnetic fields.
Adjusting speaker placement and room elements for optimal sound quality.
Information on how speaker performance changes during initial use.
Instructions for cleaning the cabinet and drive units, and handling precautions.
Highlights key technologies like Nautilus tweeter and Kevlar drivers.
Details the speaker's system type and enclosure design.
Details the types, sizes, and materials of the speaker's drivers.
Specifies the audible frequencies reproduced and their accuracy.
Describes the horizontal and vertical sound coverage angles.
Measures speaker efficiency and harmonic distortion levels.
Details nominal impedance and crossover frequencies.
Guidance on suitable amplifier power and cable impedance.
Provides the speaker's physical size and weight specifications.
Lists the different cabinet veneer options and grille material.
To Next Page