Need help?Do you have a question about the Bowers & Wilkins HTM61 and is the answer not in the manual?
General| Woofer | No |
|---|---|
| Tweeter | Yes |
| Driver diameter | 25 mm |
| Tweeter diameter | 165 mm |
| Number of drivers | 3 |
| Speaker enclosure | Reflex |
| Speaker placement | Floor, Tabletop/bookshelf |
| Audio output channels | 2.0 channels |
| Mid-range driver diameter | 150 mm |
| Housing material | - |
| Recommended usage | Speaker set unit |
| Amplifier output power | 150 W |
| Impedance | 8 Ω |
| Sensitivity | 90 dB |
| Frequency range | 42 - 50000 Hz |
| Crossover frequency | 4000 Hz |
| Total Harmonic Distortion (THD) | 1 % |
| Depth (imperial) | 13.4 \ |
| Width (imperial) | 21.5 \ |
| Height (imperial) | 7.8 \ |
| Weight (imperial) | 34 lbs |
| Dimensions (WxDxH) | 545 x 339 x 198 mm |
| Dimensions (W x D x H) (imperial) | 21.5 x 13.4 x 7.8 \ |
| Connectivity technology | Wired |
| Power source type | AC |
Weight and Dimensions| Depth | 339 mm |
|---|---|
| Width | 545 mm |
| Height | 198 mm |
| Weight | 15400 g |
To Next Page
