Bowflex Max Trainer M6 - Buy Back Guarantee; Guarantee Terms and Conditions; Unauthorized Returns Policy

50
Note: Your machine may not match the images provided exactly.
1. Unplug the AC Adapter from the wall outlet and machine.
2. Using a 5mm hex wrench, remove the indicated hardware from the
Right Upper Handlebar.
Note: Be aware that the Right Upper Handlebar must be supported when
removing the hardware.
3. Using a #2 Phillips screwdriver, remove the 4 screws (2 indicated on
one side) from the Upper Shroud.
4. Remove the Right and Left Stabilizer Shrouds from the machine (if
equipped).
Right Upper
Handlebar
Right Stabilizer
Shroud
Left Stabilizer
Shroud
Upper Shroud