66
Note: Your machine may not match the images provided exactly.
1. Unplug the AC Adapter from the wall outlet and machine.
2. Using a 5mm hex wrench, remove the indicated hardware from the
Right and Left Upper Handlebar.
Note: Be aware that the Right and Left Upper Handlebar must be sup-
ported when removing the hardware.
3. Using a #2 Phillips screwdriver, remove the 4 screws (2 indicated on
one side) from the Upper Shroud.
4. Remove the Right and Left Stabilizer Shrouds from the machine.
Right Stabilizer
Shroud
Left Stabilizer
Shroud
Upper Shroud
Left Upper
Handlebar
Right Upper
Handlebar
To Next Page
Loading...
