1
SelectTech
®
BD552 International Dumbbell Unpacking Instructions
8000770.051517.C
Nautilus, Inc., www.nautilusinternational.com | Printed in China | © 2012 Nautilus, Inc.
®
®
The following procedure will make it easier to remove
your SelectTech
®
dumbbell from its packaging.
The dumbbell is heavy. Ask for assistance if necessary.
• Open the top flaps of the shipping box and remove the
upper section of foam. See 1.
• Carefully lay the shipping box on its side so that the
base of the dumbbell faces down. See 2.
• Reach inside the box with both hands and locate the
handles on each end of the base. See 3.
• Using the handles, carefully pull the dumbbell out of the
foam and place on floor.
• You may now remove the plastic bag. See 4.
When moving the dumbbell assembly, use the handles that
are molded into each end of the base.
Note: If the dumbbell assembly is to be used for retail
display, leave the reusable strap intact. Otherwise,
remove the strap before use.
In a retail display setting, the restraint strap allows enough
movement for demonstration, but prevents damage to
the unit and helps to avoid dropping and/or misuse by
consumers.
Restraint strap
1 2
3
4
If you have questions, please contact your local distributor. To find your local distributor, go to: www.bowflexinternational.com
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all Warnings on this machine.
To Next Page
Need help?
General
