19
Bowflex® TreadClimber® Assembly and Owner’s Manual
ASSEMBLY PROCESS
Step 5: Installing Rear Side Covers
Locate the following for this step:
Parts:
• Assembly from Step 4
• Right Rear Base Plastic Cover (Qty. 1)
• Left Rear Base Plastic Cover (Qty. 1)
Hardware:
• #8 Self Tapping Phillips Head Screw (Qty. 6)
Tools:
• Phillips Screw Driver
5-1 Attach the Right Rear Base Plastic Cover to the
right side of the base assembly using 3 of the #8
Self Tapping Phillips Head Screws.
5-2 Repeat process on left side.
Figure 5: Installing Rear Side Covers
Rear Base Plastic Cover
Phillips Head Screw
To Next Page
Loading...
