ii. While pressing down on the self-
locking tab, grab the handle
mounted on the top of the battery
case and pull upwards.
iii. Once the case begins to move
along the case slots it is no longer
necessary to manually engage the
tab. The battery will slide up and
out of the slots.
NOTE:
Please ensure to fully charge the battery if you are planning to ride your bike in the next 30
days AND leave it charging for at least 1 hour once a full charge is achieved. (This allows the
Battery Management System to completely balance the individual cells inside the battery
ensuring longevity and proper functioning of your battery.)
➢ If you are not planning on riding the bike in 30 days, the battery should be charged to
approximately 80%. At this point the battery is safe for storage.