Bpt MTMA/01 User Manual

FB00329-EN
PROGRAMMING MANUAL
MTMA/01
MTMV/01

Bpt MTMA/01 Specifications

General

Brand	Bpt
Model	MTMA/01
Category	Intercom System
Language	English

Summary

General precautions

OPERATIONS FOR REMOTE CONTROL OF CALL BUTTONS

Manual configuration of terminals and as call inputs 1 and 2

Configures terminals for call inputs 1 and 2 using short circuit and button presses.

BUTTON NUMBERING

Illustrates different button numbering configurations for call units.

PROGRAMMING ENTRY PANELS WITHOUT VA/01 OR A/01

Programming for the first time

Guides first-time programming for entry panels without specific modules.

Entering programming mode

Steps to enter programming mode using the PROG button and LEDs.

Programming buttons

Procedure to program individual call buttons on the entry panel.

Programming calls

Links call buttons to internal receivers using lock release and AUX2 buttons.

Exiting Programming

Method to exit programming mode by briefly pressing the PROG button.

Adjusting the brightness and colour of the unit backlight

Customizes backlight color and brightness using call buttons.

Programming the entry panel video camera

Adjusting the brightness level of the light on the entry panel

Reprogramming

Programming an intercommunicating group

Enabling/disabling

Activates or deactivates the intercommunicating function.

Programming an intercommunicating group

Configures intercommunication between multiple units.

PROGRAMMING ENTRY PANELS WITH VA/01 OR A/01

Programming for the first time

Guides initial setup for entry panels with specific modules.

Entering programming mode

Steps to enter programming mode via power supply and PROG LED.

Programming buttons

Assigns call buttons to units, indicated by LED status.

Programming calls

Exiting Programming

Adjusting the brightness and colour of the unit backlight

Programming the entry panel video camera

Adjusting the brightness level of the light on the entry panel

Reprogramming

RESTORE FACTORY DEFAULT