bq Witbox - Simmetry; View mode

ENGLISH
40
· Igus power screw for the Z axis with exible
motor coupling.
· Powder-coated moving parts and supports.
· Three-point printer base levelling system
with damping.
· Quick-change printer base system with
neodymium magnets.
Dimensions
· Work area: X 297, Y 210, Z 200 (mm)
· Total external dimensions: length 505, width
388 and height 450 (mm)
Extruder Mechanics
· Single extruder.
· Own-design extruder.
· 0.4 mm nozzles.
· Cooling system for parts.
Software
· Pre-congured Marlin rmware.
· Compatible hosts: Repetier, Pronterface,
Cura, ReplicatorG.
· Slic3r (recommended and pre-congured).
· Skeinforge.