TRENCHER INSTALLATION
617 TRENCHER
F
F
4. Tilt the toolbar back to hook the trencher onto the toolbar. It may be neces-
sary to lift the loader arm somewhat.
5. Set the quick-change attaching lock to the locked position to secure the
trencher. It may be necessary to raise, lower, or tilt the toolbar in order for the
trencher mount and toolbar to properly align so the locking mechanism can
be activated.
6. With the auxiliary hydraulic system turned off, route the trencher hydraulic
hoses over the top of the mount and toolbar and connect to their proper
auxiliary couplers.
7. Complete the predelivery check list located in the back of this manual (Sec-
tion R). Trencher installation is now complete.
5781
2-21-92
To Next Page
Loading...