Bradco 617 - Specifications

S-342
1-29-92
(B) Available Trench Widths
617 TRENCHER SPECIFICATIONS
DESCRIPTION SPECS
A. Trench Depth w/auger touching
ground, 65° digging angle
30" Boom ........................................................... 30"
36" Boom ........................................................... 36"
48" Boom ........................................................... 48"
B. Trench Width - SEE CHART
D. Recommended Trenching Angle.............................. 65 °
E. Headshaft Height........................................................8 "
F. Trencher Length
30" Boom ........................................................... 66"
36" Boom ........................................................... 73"
48" Boom ........................................................... 86"
G. Trencher Width......................................................... 48"
H. Trencher Height........................................................ 32"
S. Side Shift
Right of Center................................................... 17"
U. Spoil Discharge Reach ............................................. 18"
Weight w/ 3' Boom and 6" Chain .......................... 925#
Hydraulic System Requirements:
Pump............................................................. 11-20 GPM
Operating Pressure ...................................2000-2400 PSI
BRADCO®
P.O. Box 266 · Delhi, Iowa 52223 USA
(319) 922-2981 · (800) 922-2981
Fax 319-922-2130
A Division of American Trencher Inc.
Construction Machinery Since 1964
SPECIFICATIONS AND DESIGN ARE
SUBJECT TO CHANGE WITHOUT
NOTICE AND WITHOUT LIABILITY
THEREFORE. WHEREVER APPLI-
CABLE SPECIFICATIONS ARE IN
ACCORDANCE WITH SAE
STANDARDS.
Bradco Trenchers are covered
by a one year limited warranty.
Printed in U.S.A.
COPYRIGHT 2-92