Bradco 617 - 2.00 Pitch Chain Assemblies

To Next Page

To Previous Page

DIGGING CHAIN OPTIONSDIGGING CHAIN OPTIONS

DIGGING CHAIN OPTIONS

2.00" PITCH DIGGING CHAIN ASSEMBLIES

GENERAL INFORMATION

This page contains a listing of all of the 2.00" pitch digging chain

assemblies offered for your trencher. Each chain assembly comes with all

necessary teeth and spacers already installed. Just thread the chain onto the

trencher and fasten the two ends together with the pin and keeper pin included

in the assembly. A crumber shoe of the appropriate width is also included in

the chain assembly.

Before you order a new chain, be sure to check for compatibility with

corresponding components. You may need to order more than just a chain

assembly. You must use a digging boom of the same digging depth as the chain.

The crumber bar must also be of the same digging depth. The digging sprocket

must also be of the same pitch as the chain. All of these components must

match for the trencher to function properly.

Bare 2.00" pitch digging chain (without teeth, spacers, or hardware) can

be ordered in any desired length under the part number 79018. Just use this

number and then specifiy the length desired in pitches (example, 54 pitches of

chain would be needed for a 36" boom).

2.00" PITCH DIGGING CHAIN ASSEMBLIES

Complete chain assemblies. Includes chain with all teeth

and spacers attached. Also includes appropriate width crumber

shoe.

CHAIN ASSEMBLIES WITH A TOOTH EVERY STATION

DESCRIPTION LENGTH OF CHAIN TENSIL PART

(boom used X trench width) (in 2.00" pitches) STRENGTH NO.

For 30" Boom 6" Wide 48 Pitch 50,000# 79154

For 30" Boom 8" Wide 48 Pitch 50,000# 79155

For 30" Boom 10" Wide 48 Pitch 50,000# 79156

For 30" Boom 12" Wide 48 Pitch 50,000# 79157

For 36" Boom 6" Wide 54 Pitch 50,000# 79099

For 36" Boom 8" Wide 54 Pitch 50,000# 79100

For 36" Boom 10" Wide 54 Pitch 50,000# 79158

For 42" Boom 6" Wide 62 Pitch 50,000# 82114

For 42" Boom 8" Wide 62 Pitch 50,000# 82115

For 42" Boom 10" Wide 62 Pitch 50,000# 82116

For 48" Boom 6" Wide 68 Pitch 50,000# 79101

For 48" Boom 8" Wide 68 Pitch 50,000# 79102

5804

10-10-00-3