TROUBLE SHOOTING
617 TRENCHER
N
N
2. Quick coupler or hose restriction. Inspect couplers and hoses for dirt, rust,
and other contaminates and repair or replace as needed.
3. Motor or hose size not balanced to skid steer. A hose or a motor that is too
small can cause added internal friction and resultant heat build-up. Check
mounting kit parts list and diagram (See Section E) for proper hose size and
type.
4.
Skid steer not equipped with oil cooler or sufficient sump capacity. Check
with your skid steer dealer for information and availability of auxiliary cooling
and sump kits. Install if available. If not available stop skid steer and tren-
cher and allow them to cool when they get too hot.
5800
2-26-92
To Next Page
Loading...