Bradco HP400 - Page 35

9351 7-27-07-5
ITEM REQ’D PART NO. DESCRIPTION
1 4 1022 .31" UNC X 1.00" Hex Capscrew
4 1502 .31" Lock Washer
4 1513 .31" Flat Washer
2 2 17737 Depth Indicator
3 4 1589 Set Screw
4 2 17729 Pivot Plate
5 2 18685 Bushing
6 1 17677 Right Link
1 1652 1.25" Snap Ring
1 64727 1.25" Thrust Washer
7 2 17734 Bracket
8 1 17725 Right Side Plate
9 1 18651 Cannister (16" & 18" Planer)
1 17600 Cannister (24" Planer)
1 19431 Cannister (30" Planer)
1 101085 Cannister (40" Planer)
2 6616 Grease Fitting
10 1 17676 Left Link
1 1652 1.25" Snap Ring
1 64727 1.25" Thrust Washer
11 1 17722 Left Side Plate
12 2 17728 Retainer
13 4 1092 .50" UNC X 2.00" Hex Capscrew
4 1505 .50" Lock Washer
14 20 1965 .50" UNC X 2.50" Hex Capscrew Grade 8
20 1505 .50" Lock Washer
20 1646 .50" Hard Flat Washer
15 4 17727 Clamp Plate
16 4 17731 Spacer
17 8 18681 Shim
18 6 1821 .62" UNC X 2.50" Hex Capscrew - Grade 8
6 1627 .62" Hard Flat Washer
6 1839 .62" UNC Deformed Lock Nut
 19 1 19886 RubberDeector(16"&18"Planer)
  1 19887 RubberDeector(24"Planer)
  1 19888 RubberDeector(30"Planer)
  1 101125 RubberDeector(40"Planer)
PLANER ASSEMBLY
16”, 18”, 24”, 30” & 40” COLD PLANER ASSEMBLIES
LIST 1 OF 3
NOTE: There may be a slight quantity difference in hardware between the various cold
planers. Quantity listed is for the 24" planer.
75566
33