To Next PageTo Next Page
Need help?Do you have a question about the Bradford White UCG100H199 and is the answer not in the manual?
General| Capacity | 100 gallons |
|---|---|
| Energy Source | Natural Gas |
| Input BTU/hr | 199, 000 BTU/hr |
| Vent Size | 4 inches |
| Type | Gas |
Explains DANGER, CAUTION, WARNING, and NOTICE symbols and terms used in the manual.
Lists physical dimensions, input ratings, and performance specifications for different models.
Describes key features such as the integrated control, thermostat, and combustion system.
Covers sacrificial anodes for tank protection and circulation requirements for dishwashers.
Critical safety warnings and preparation steps before installing the water heater.
Guidance on choosing a location, required clearances, and air supply for safe operation.
Steps for unpacking, moving, and ensuring proper air flow, with associated warnings.
Proper installation procedures for the venting system according to codes and standards.
Specifies required clearances for vent terminals and maximum allowable vent pipe lengths.
Instructions for connecting water supply, filling the tank, and draining procedures.
Warnings about scalding risks and recommendations for safety measures like mixing valves.
Requirements for gas supply lines, pressure regulations, and safe leak detection.
Guidelines for safe electrical wiring, power supply, and circuit requirements.
Procedures for safe startup, shutdown, and adjusting the water temperature via the control display.
Guides on interpreting error codes, resetting lockouts, and accessing error history.
Outlines routine maintenance tasks, inspections, and a suggested schedule.
Procedures for removing sediment, scale, and inspecting/replacing anodes.
Details the operational steps of the Honeywell integrated control system.
Guides on accessing service mode, viewing diagnostic data, and troubleshooting common issues.
Lists and illustrates all major parts of the water heater for service and replacement.
