What to do if Brady BMP 71 is not responding?
If your Brady Label Maker is not responding, the battery may be dead. Attach the AC adapter to provide power and charge the battery, or install a new battery.
How to fix Brady Printer cutter that does not cut?
If the cutter on your Brady Printer is not cutting, there might be adhesive buildup. Clean the cutter blades with a moistened swab from the cleaning kit. (See page 32 for more information on cleaning the printer.)
What to do if my Brady Label Maker is printing poorly?
Poor print quality on your Brady Label Maker can stem from several factors: * **Incorrect material combination:** Ensure you're using the correct ribbon for the label roll. * **Worn battery:** If your battery pack is old, it might not hold a charge well. Consider replacing it, as battery life is about one to three years. * **Incompatible media:** The ribbon and label media might not be compatible. Try a different combination. * **Incorrect installation:** Double-check that the ribbon and label media are installed correctly. * **Dirty print head:** Dust or adhesives on the print head can cause issues. Clean the print head.
How to fix Brady BMP 71 when it will not feed labels?
If your Brady Label Maker isn't feeding labels, check these two things: * **Leading edge position:** Ensure the leading edge of the label roll is inserted far enough, up to the black line under the ribs. * **Leading edge condition:** If the leading edge is uneven or torn, use scissors to cut a straight edge.
Why does my Brady BMP 71 Label Maker print faint labels?
Faint prints from your Brady Label Maker can result from the ribbon not advancing properly. With the ribbon installed, tension it by rotating the rewind spool downward until all slack is removed. Alternatively, try a different ribbon cartridge.
What does 'Ribbon not optimized for label type' mean on Brady BMP 71?
The error 'Ribbon not optimized for label type' on your Brady Label Maker means that the installed ribbon and label material types may not be compatible. Replace either the ribbon or the label/media, then press [CLEAR/ESC] key to clear the error.
Why are there void areas or lines on my Brady BMP 71's printed text?
Void areas or lines on printed text from your Brady Label Maker are often due to ribbon wrinkling. Tension the installed ribbon by rotating the rewind spool downward to remove slack. You can also try another ribbon cartridge.
What does 'Label and ribbon color are identical' mean on Brady Label Maker?
This error message on your Brady Label Maker indicates that the ribbon and label colors are the same. Replace either the ribbon or the label/media, then press the [CLEAR/ESC] key.
What to do if my Brady Label Maker says 'No ribbon installed'?
The 'No ribbon installed' error on your Brady Label Maker can occur due to: * No ribbon or incorrect installation: Press the [CLEAR/ESC] key, then ensure the ribbon is correctly installed. * Damaged ribbon cartridge: The circuit board on the ribbon cartridge may be damaged. Try replacing the ribbon cartridge. * Damaged printer contacts: The printer contacts for reading the ribbon cartridge may be damaged.
What to do if Brady Printer keyboard works intermittently?
If the keyboard on your Brady Printer works intermittently or not at all, one or more keys might be stuck in a depressed state. Identify any keys stuck in the down position and repress the key to unstick it.
General| Print Resolution | 300 dpi |
|---|---|
| Print Technology | Thermal transfer |
| Cutter | Automatic |
| Keyboard | QWERTY |
| Display | LCD |
| Power Source | Rechargeable battery, AC adapter |
| Weight | 2.5 lbs |
| Print Speed | 1.5 inches per second |
| Label Width | 0.25 to 2.0 inches |
| Supported Materials | Vinyl, Polyester |
| Connectivity | USB, Wi-Fi |
To Next Page
