Braeburn 2020NC User Manual

10
Programming a 7 Day Schedule
The 7 day programming mode gives you the option to program individual
days (1 day at a time) or to use SpeedSet and program the entire week (all
7 days) with a 4 event program schedule.
Setting All 7 Days at Once (SpeedSet
®
)
NOTE: Setting all 7 days at once will copy over any previously programmed
individual days.
1. Hold the PROG button for 3 seconds. The
display will switch to SpeedSet programming
mode. All 7 days of the week will appear and
the hour will be flashing.
2. Select HEAT or COOL with SYSTEM switch.
3. Press the or button to adjust the hour
for the MORN (morning) event. Press PROG.
4. Press the or button to adjust the minute for the MORN event.
Press PROG.
5. Press the or button to adjust the temperature for the MORN event.
Press PROG.
6. Repeat steps 3-5 for the DAY, EVE and NIGHT events.
7. If needed, repeat steps 2-6 to program the opposite mode (HEAT or COOL).
8. Press RETURN to exit.
Setting Individual Days (7 Day Mode)
1. Press the PROG button. The display will
switch to programming mode. M (Monday)
will be displayed and the hour will be flashing.
2. Select HEAT or COOL with SYSTEM switch.
3. Press DAY/TIME to select the day you
would like to program.
4. Press the or button to adjust the hour
for the MORN (morning) event. Press PROG.
5. Press the or button to adjust the minute for the MORN event.
Press PROG.
6. Press the or button to adjust the temperature for the MORN event.
Press PROG.
7. Repeat steps 4-6 for your DAY, EVE and NIGHT events.
8. If needed, repeat steps 3-6 to select a different day to program.
9. If needed, repeat steps 2-8 to program the opposite mode
(HEAT or COOL).
10. Press RETURN to exit.

Braeburn 2020NC Specifications

General

Brand	Braeburn
Model	2020NC
Category	Thermostat
Language	English