EasyManua.ls Logo

Braeburn 2020NC - Additional Operation Features; Compressor Protection; Thermostat Maintenance; Changing the Batteries

Braeburn 2020NC
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Additional Operation Features
Compressor Protection
This thermostat includes an automatic compressor protection delay to help
avoid potential damage to your system from short cycling. This feature
activates a short delay after turning off the system compressor.
9
Thermostat Maintenance
Changing the Batteries
Depending on your particular installation, this
thermostat may be equipped with two (2) “AA
type alkaline batteries.
If batteries are installed and they become low,
a low battery indicator will appear in the display.
You
should change your batteries immediately
when you see the low battery signal by following
these instructions.
1. Remove thermostat body by gently pulling it from base.
2. Remove old batteries and replace with new batteries.
3. Make sure to correctly position the (+) and (-) symbols.
4. Gently push thermostat body back onto base.
NOTE: We recommend replacing the thermostat batteries annually or if the
thermostat will be unattended for an extended period of time.
Thermostat Cleaning
Never spray any liquid directly on the thermostat. Using a soft damp cloth
wipe the outer body of the thermostat. Never use any abrasive cleansers to
clean your thermostat.
+
+

Other manuals for Braeburn 2020NC

Related product manuals