Braeburn 5220 Detailed Installer Guide

Detailed
Installer Guide
Programmable Thermostats
1 Specifications 2 Installation and Wiring 3 Quick Reference
4 Installer Settings 5 System Testing
• Possible electric shock or damage to equipment can occur.
• Disconnect power before beginning installation.
Caution
This thermostat requires 24 Volt AC Power or 2 properly installed “AA” Alkaline
batteries for proper operation. When connecting 24 Volt AC Power the batteries may
be installed as a backup.
For use only as described in this manual. Any other use will void warranty.
5020 Single Stage Heat / Cool Conventional
or Heat Pump
5220 Up to 3 Heat / 2 Cool Heat Pump
Up to 2 Heat / 2 Cool Conventional
Warning
For installation by experienced service technicians only.
®
This thermostat is compatible with:
  • Singlestageheat/coolconventionalandheatpumpsystems
  • Conventionalsystemsupto2stagesofheatingand2stagesofcooling(5220only)
  • Heatpumpsystemsupto3stagesofheatingand2stagesofcooling(5220only)
  • 250–750millivoltheatingonlysystems
  • 2or3wirehydroniczonesystems
Electrical and control specifications:
  • ElectricalRating:24VoltAC
  • 1ampmaximumloadperterminal
  • ACPower:18–30VoltsAC
  • DCPower:3.0VoltDC(2“AA”AlkalineBatteriesIncluded)
  • ControlRange:45°–90°F(7°–32°C)
  • TemperatureAccuracy:+/-1°F(+/-.5°C)
  • OutdoorTemperatureDisplayRange:-40°-120°F(-40°-49°C)
Terminations
  • 5020:Rc,Rh,G,W1,O/B/V3,Y1,C,S1,S2
  • 5220:Rc,Rh,G,W1/E/W3,W2,O/B/V3,Y1,Y2,L,C,S1,S2
1
Specifications
5020W-100-02
Model number is located on back of thermostat.
PREMIER
SERIES

Braeburn 5220 Specifications

General

Brand	Braeburn
Model	5220
Category	Thermostat
Language	English