UM93001C
79
4 11 Sleep Mode4 11 Sleep Mode
FUNC selects FULL to provide full function.
SLEP selects YES to enable the sleep mode.
Press for 3 seconds, the unit will enter its sleep mode.
During sleep mode:
FUNC selects FULL to provide full function.
SLEP
selects YES to enable the sleep mode.
Press
for 3 seconds, the unit will enter its sleep mode.
During
sleep mode:
To Sleep Mode:EnterTo Sleep Mode:Enter
(1) Shut off all display except a decimal point which is lit periodically.
(2) Shut off all outputs and alarms.
(1) Shut off all display except a decimal point which is lit periodically.
(2)
Shut off all outputs and alarms.
To Sleep Mode:ExitTo Sleep Mode:Exit
(1) Press to leave the sleep mode.
(2) Disconnect the power.
(1) Press to leave the sleep mode.
(2)
Disconnect the power.
Sleep Function can be used to replace a to reduce the system cost.power switchSleep Function can be used to replace atoreduce the system cost.power switch
Default: SLEP=NONE, Sleep mode is disabled.Default: SLEP=NONE, Sleep mode is disabled.
Note: If the Sleep mode is not required by your system, the SLEP should select
NONE to disable sleep mode against undesirable occurrence.
Note: If the Sleep mode is not required by your system, the SLEP should select
NONE
to disable sleep mode against undesirable occurrence.
Sleep Mode Features:Sleep Mode Features:
Setup MenuSetup Menu
Shut off display
Shut off outputs
Green Power
Replace Power Switch
Shut off display
Shut
off outputs
Green
Power
Replace
Power Switch
FUNC=FULL
SLEP=YES
FUNC=FULL
SLEP=YES
To Next Page
Loading...
