Brainchild P41 User Manual

2
UM0P411A
Warning SymbolWarning Symbol
Use the ManualUse the Manual
The Symbol calls attention to an operating procedure, practice, or the
like, which, if not correctly performed or adhered to, could result in
personal injury or damage to or destruction of part or all of the
product and system. Do not proceed beyond a warning symbol until
the indicated conditions are fully understood and met.
The Symbol calls attention to an operating procedure, practice, or the
like,
which, if not correctly performed or adhered to, could result in
personal
injury or damage to or destruction of part or all of the
product
and system. Do not proceed beyond a warning symbol until
the
indicated conditions are fully understood and met.
Installers
System Designer
Expert User
Installers
System
Designer
Expert
User
Read Chapter 1, 2
Read All Chapters
Read Page 15,16
Read Chapter 1, 2
Read
All Chapters
Read
Page 15,16
NOTE:
It is strongly recommended that a process should incorporate a
LIMIT CONTROL like L91 which will shut down the equipment at
a preset process condition in order to preclude possible
damage to products or system.
It is strongly recommended that a process should incorporate a
LIMIT
CONTROL like L91 which will shut down the equipment at
a
preset process condition in order to preclude possible
damage
to products or system.
Information in this user's manual is subject to change without notice.Information in this user's manual is subject to change without notice.
Copyright February 2007, The Brainchild Corporation, all rights
reserved. No part of this publication may be reproduced, transmitted,
transcribed or stored in a retrieval system, or translated into any
language in any form by any means without the written permission of
the Brainchild Corporation.
aCopyright February 2007, The Brainchild Corporation, all rights
reserved.
No part of this publication may be reproduced, transmitted,
transcribed
or stored in a retrieval system, or translated into any
language
in any form by any means without the written permission of
the
Brainchild Corporation.
a
This manual is applicable for the products with software version
12 and later version.
This manual is applicable for the products with software version
12
and later version.

Brainchild P41 Specifications

General

Brand	Brainchild
Model	P41
Category	Controller
Language	English