Brainchild P41 - DC Voltage Supply and Alarm Specifications; Data Communication and Retransmission Specs

DC Voltage Supply Characteristics ( Installed at Output 2 )DC Voltage Supply Characteristics ( Installed at Output 2 )
Type
Tolerance
Max. Output Current
Max. Output Current
Ripple VoltageRipple Voltage
Isolation BarrierIsolation Barrier
20 V20 V A1 VA1 V 25 mA25 mA
0.2 Vp-p0.2 Vp-p
500 VAC500 VAC
500 VAC500 VAC
500 VAC500 VAC
12 V12 V
A0.6 VA0.6 V 40 mA40 mA
0.1 Vp-p0.1 Vp-p
5V5 V A0.25 VA0.25 V 80 mA80 mA
0.05 Vp-p0.05 Vp-p
Alarm
Alarm Relay :
Alarm Functions :
Alarm Mode :
Dwell Timer :
Form C Rating
2A/240VAC, life cycles 200,000 for resistive load.
Dwell timer, Deviation High / Low Alarm,
Deviation Band High / Low Alarm,
PV High / Low Alarm,
Normal, Latching, Hold, Latching / Hold.
0.1 - 4553.6 minutes
Alarm Relay :
Alarm
Functions :
Alarm Mode :
Dwell
Timer :
Form
C Rating
2A/240VAC,
life cycles 200,000 for resistive load.
Dwell
timer, Deviation High / Low Alarm,
Deviation
Band High / Low Alarm,
PV
High / Low Alarm,
Normal,
Latching, Hold, Latching / Hold.
0.1
- 4553.6 minutes
Data CommunicationData Communication
Interface :
Protocol :
Address :
Baud Rate :
Parity Bit :
Communication Buffer : 256
RS-232 ( 1 unit ), RS-485 ( up to 247 units )
Modbus Pro ol RTU mode
1 - 247
2.4 ~ 38.4 Kbits/sec
None, Even or Odd
toc
bytes
Interface :
Protocol
:
Address
:
Baud
Rate :
Parity
Bit :
Communication
Buffer : 256
RS-232
( 1 unit ), RS-485 ( up to 247 units )
Modbus
Pro ol RTU mode
1
- 247
2.4
~ 38.4 Kbits/sec
None,
Even or Odd
toc
bytes
Resolution : 15 bits
0.05 % of span 0.0025 %/ C
0 - 500 ohms ( for current output )
10 K ohms minimum ( for voltage output )
0.01 % for full load change
Accuracy :
Load Resistance :
Output Regulation :
AAL
Resolution : 15 bits
0.05
% of span 0.0025 %/ C
0
- 500 ohms ( for current output )
10
K ohms minimum ( for voltage output )
0.01
% for full load change
Accuracy
:
Load
Resistance :
Output
Regulation :
AAL
Analog RetransmissionAnalog Retransmission
4-20 mA, 0-20 mA, 0 - 5V,
1-5V,0-10V
Output Signal : 4-20 mA, 0-20 mA, 0 - 5V,
1
- 5V, 0 - 10V
Output
Signal :
UM0P411A
83