732 South Racetrack Road, Henderson, Nevada 89015
info@vinotemp.com
1. To remove the exhaust filters, slide the filter toward the back of the microwave and then pull
it downward while sliding it out of the side slot. Repeat the step for the second filter.
2. Soak the ventilation filters in hot water using a mild detergent or wash in a dishwasher. Rinse
well and shake to dry.
CAUTION: Do not use ammonia. The aluminum on the filter will corrode and darken.
3. To reinstall the exhaust filter, slide it into the side slot and then push up and toward the front
of the microwave to secure it. Repeat for the second filter.
Replacing the charcoal filter
The charcoal filter is used in non-vented, recirculated installations. The filter should be
changed every 6 to 12 months depending on use.
1. Unplug the microwave oven or turn off power at the main circuit breaker.
2. Remove the vent grill screws.
3. Pull the vent grill away from the unit.
To Next Page
Loading...
