11 Ifyldning og komprimering USA.fm • Page 20Baler B3 and B4
11 Filling and compression
In order to avoid unnecessary damage to the press, we recommended you to read chapter
4, Use and function.
If the press is installed near children's activities, one should make sure before starting that the
children are not using the chamber as a hiding place. This is a possibility that must not be
overlooked.
Also bear in mind that small animals may be hiding in waste which has not yet been compressed.
Distribution of waste:
Fill the chamber with material and
distribute this evenly.
close the door so the lock
mechanism engages.
Compression:
In order to activate the start button between each press
cycle, the filling door must be opened and closed. This is
because of the extra monitoring of the press by the door
switch, and prevents intentional evasion of the safety
system.
When the orange finish indicator button lights/blinks, the
bale has reached its maximum and the platen parks on
top of the bale.
See chapter 12, Binding for further handling.
WARNING
To Next Page
Loading...