12 Afbinding USA.fm • Page 23Baler B3 and B4
12 Binding
Operation of the baler must always be carried out in accordance with the local regulations for use
of technical equipment (machines), which can vary from country to country.
Cord or strap (Hereafter called "the strap")
When the orange finish indicator button lights and thus
indicates that the bale is ready for binding, do the
following:
Press the lit orange finish indicator button so the platen
goes back to the top position.
The orange finish indicator button now starts to flash.
From here on, it is no longer possible to interrupt the
process, which must be concluded with binding and
bale-ejection.
To Next Page
Loading...