2 Safety Precautions
To prevent damage to the cleaner:
• Do change your solution regularly.
• Do not cover vents on the cover.
• Do not operate the cleaner dry.
• Do not place parts or containers directly on the bottom of the cleaning
tank; use a tray or wire to suspend items. Failure to comply may
cause transducer damage and will void your warranty.
• Do not allow the solution to drop more than 3/8 inch below the
operating level line with heat or ultrasonics on. Failure to comply may
cause transducer and/or heater damage and will void your warranty.
To Next Page
Loading...
