Safety First
2-7Digital Compact
BRANSON Ultrasonics Digital Compact Version 22.08.2002
2.7 Safety Systems of the Unit
DANGER
For operation in the production environment, safety systems
must not be removed, by-passed or de-activated. Deactivating
one of the following safety systems is NOT permitted unless a
suitable alternative safety system is used.
2.7.1 Electronic System Protection Monitoring (SPM)
The automatic system protection SPM (= System Protection Monitor) is
an electronic system protection incorporated in the ultrasonic power
supply. The SPM stops the output of ultrasonic energy in case of power
supply overload and incorrect or defective system components.
2.7.2 Disconnecting from the Mains
The power supply unit serves has the function of a main switch and
separates the unit from the mains.
2.8 Obligatory Safety Inspection
NOTE!
Inspect the safety systems at intervals prescribed by the trade
association.
!
To Next Page
Loading...
