"USE AND DISPOSAL" POLICY CONCERNED WITH ENVIRONMENT PRESERVATION
We try our best to preserve the environment, and are always concerned about our environmental impact at
each step of planning, development, production, distribution, use and disposal of products, and for our over-
all operations through an “environmentally friendly” management system. We comply with international en-
vironmental regulations, environmental regulations designated by country and local authorities and other re-
quirements with which we are in agreement, and we work towards the prevention of environmental pollution
and the conservation of resources. We provide environmental education and have an awareness campaign
to raise environmental awareness among all our employees and members of the supporting companies.
We introduce the “Use and Disposal” policy concerned with environment preservation as follows.
1. Please read the operator’s manual though for global environment protection. Overload on the machine shortens the
product life and increases the harmful exhaust gas which cause air pollution due to the incomplete combustion.
2. When replacing various uids (for engine, transmission, hydraulics, etc.) by yourself, don’t dispose the used oil to
anywhere not recommended. It can pollute the ground and water. Please contact your local dealer to dispose it legal-
ly.
3. Observe the operator’s manual and store or dispose the waste product properly. Rust, oil, etc leaked from waste
product improperly stored can pollute the ground and water. Accordingly for a waste product disposal, contact the
necessarily “approved waste collection and recycling facility” to discard the used materials legally.
To Next Page
Loading...
Need help?
General
