Branson F42h Operator's Manual

5
-
3
OPERATION
5
RUNNING-IN PERIOD
▶
Within rst 10 hours of operation

Inspect daily or every 10 hours

Tighten the wheel bolts
▶
After rst 50 hours of operation

Tighten the wheel, disc and hub
bolts

Check the alternator and fan belt
tension as well as air inlet

Tighten the cooling system's
hose and clamp

Perform the scheduled 50-hour
maintenance
STARTING ENGINE
HOW TO START
1. Check the fuel gauge. Make sure
that a sufcient amount of fuel is
in the tank.
6015o323A
IMPORTANT
A l w a y s k e e p w h e e l bo l t s
t i g h t e n e d t o p r e v e n t an y
accident. Confirm that the
wheel bolts are tight before
operation. Check wheel bolt
torque at least twice within
the rst 10 hours of operation,
check it periodically at every
50 hours thereafter. Change
the oil and filter after first 50
hours of operation.
•

Change the transmission/hy-
draulic oil and oil lter element

Change the engine oil and lter

Change the front axle uid
K3트랙터-유럽향(Branson 36R,42R))-영문-03 3 2016-01-27 오전 10:56:59

Branson F42h Specifications

General

Brand	Branson
Model	F42h
Category	Tractor
Language	English