BRASS MONKEY GH1646 - User Manual

Need help?

Do you have a question about the BRASS MONKEY GH1646 and is the answer not in the manual?

Summary

Warnings and Safety Information

Manufacturer Liability Disclaimer

Manufacturer disclaims responsibility for injury due to misuse of the appliance.

Operational Safety Warnings

Key safety precautions for appliance operation, handling, environment, and power supply.

Repair and Usage Cautions

Safety notes for repairs, installation, and use by children or persons with limited capabilities.

Important Notices

General Operation Notices

Notices on cleaning, defrosting, storage, and disposal compliance.

Before First Use

Pre-Use Instructions

Read safety information, keep packaging, and unpack carefully before initial use.

Product Features and Contents

Key Product Features

Lists key features like LG compressor, app control, efficiency, and power options.

Package Contents

Details the items included in the product package.

Operation Guide

Power and Battery Protection

Controls compressor, provides battery protection, and details voltage cut-in/out levels.

Power Display and Settings

Battery Power Indicator

Shows the relationship between battery level indicators and voltage readings.

Cable Length Specifications

Provides specifications for DC cable cross-section and maximum length for different voltage inputs.

Temperature Setting Range

Specifies the temperature setting range for the unit and the LCD display.

Control Panel Operations

Temperature Adjustment

Explains how to adjust temperature using the '+' and '-' buttons for the unit.

Bin Cooling Control

Describes how to cut off cooling for the left bin by pressing specific buttons simultaneously.

Power and Auto-Restore

How to turn the unit ON/OFF and its behavior after power interruption.

Compressor and Battery Settings

How to set compressor speed and battery protection voltage levels.

Internal Light Control

How to turn the internal light on/off, with auto-off for the right bin light.

Troubleshooting Guide

Common Operational Issues

Solutions for issues like refrigerator not working, compartments too warm, or food freezing.

Noise and Water Phenomena

Explains normal phenomena causing water flow noise, waterdrops, and compressor noise.

Error Code Diagnosis

Lists common error codes (F1-F7, FS) and their possible causes and remedies.

Cleaning, Care, and Maintenance

Cleaning Procedures

Safe methods for cleaning the appliance, avoiding electric shock and damage.

Storage and Defrosting

Steps for storing the device when not in use and how to defrost it.

Smart Control App Usage

App Download and Pairing

Instructions for downloading the "BRASS MONKEY" app and pairing it with the fridge.

App Control Interface

Explanation of various functions available on the app's control panel.

App Control Notes

Important notes about using the app, including the lock icon function.

Warranty Information

Warranty Coverage Details

Details the 3-year warranty period and what it covers and excludes.

Consumer Rights and Claims

Explains consumer rights, how to claim warranty, required proof, and return expenses.

Contact Information

Provides contact details for Electus Distribution for warranty claims.

This document is an instruction manual for the Brass Monkey GH1646 & GH1648 portable dual-zone fridge/freezer, available in 80L and 100L capacities.

Function Description

The Brass Monkey GH1646 & GH1648 is a portable dual-zone fridge/freezer designed for cooling and freezing food and beverages. It features an LG compressor and can be controlled via a Bluetooth APP. The appliance is equipped with superior electronic technology, ensuring high efficiency and low energy consumption. It offers battery protection to efficiently safeguard your vehicle's battery. The dual-zone design allows for separate temperature control in two compartments, enabling simultaneous refrigeration and freezing.

Important Technical Specifications

Model: GH1646 & GH1648
Capacity: 80L / 100L
Compressor: LG compressor
Power Input: 12V/24V DC and 240V AC (via included adaptor)
Temperature Setting Range: -20°C to 20°C
LCD Display Range: -20°C to 40°C
Battery Protection Levels (Cut-out/Cut-in Voltages):
- 12V System:
  - Low: 8.5V (cut-out) / 10.9V (cut-in)
  - Med: 10.1V (cut-out) / 11.4V (cut-in)
  - High: 11.3V (cut-out) / 12.6V (cut-in)
- 24V System:
  - Low: 21.6V (cut-out) / 23.0V (cut-in)
  - Med: 22.3V (cut-out) / 23.7V (cut-in)
  - High: 24.3V (cut-out) / 25.7V (cut-in)
Compressor Speed: Max (3000 RPM) and ECO (2000 RPM) modes
Cable Length Specification (Max for 12V/24V systems based on AWG/mm²):
- 2.5mm² (AWG 12): <2.5m (12V) / <5m (24V)
- 4mm² (AWG 12): <4m (12V) / <8m (24V)
- 6mm² (AWG 10): <6m (12V) / <12m (24V)
- 10mm² (AWG 8): <10m (12V) / <20m (24V)
Refrigerant: Flammable refrigerant (local regulations for disposal apply)

Usage Features

Dual Zone Control: The appliance features two separate compartments, "L-Box" (Left) and "R-Box" (Right), allowing for independent temperature settings. However, only one temperature can be set at a time for the entire unit, or the left bin cooling can be cut off for right bin cooling only.
Control Panel: The front panel includes buttons for:
- Temperature Adjustment: "+" and "–" buttons to increase or decrease the target temperature.
- ON/OFF Power Button: To turn the unit on or off.
- Battery Protection Button: To select Low, Med, or High battery protection levels.
- Compressor Speed Button: To switch between Max (3000 RPM) and ECO (2000 RPM) modes.
- Light Button: To turn on/off the internal light for the left and right bins. The light automatically turns off after 3 minutes if forgotten.
Automatic Restart: If the power source is cut off, the unit will automatically switch back on with the same settings once power is restored.
Battery Electric Power Display: An LCD display shows the current battery level in six sections, indicating voltage from 9.7V to 13.2V.
Buzzer Alarm: The refrigerator emits a buzzer sound when any button is pressed. A buzzer alarm also sounds when the battery level reaches section 1 (lowest).
Smart Control (APP):
- Download: The "BRASS MONKEY" APP can be downloaded by scanning a QR code (for Apple or Android devices) or searching in the iTunes App Store or Google Play Store.
- Pairing: The APP pairs with the fridge by pressing the "set" button on the fridge's control panel.
- Functions: The APP allows control over various functions, including:
  - Freezer zone current temperature
  - Refrigerator zone current temperature
  - Battery protection model (High/Medium/Low)
  - Turn ON/OFF the fridge
  - Current voltage
  - Battery capacity (Note: Battery is not supported on this model)
  - Freezer zone temperature setting
  - Refrigerator zone temperature setting
  - ECO (Energy-saving) / MAX (Fast cooling) mode switch
  - Children's Lock/Unlock
  - Celsius / Fahrenheit switch
  - Unpair the device and return to Search
- Lock Feature: The lock icon on the APP can lock/unlock the control panel on the fridge. When locked, the fridge can only be controlled via the APP.
Placement: The appliance must be placed on a level surface for more than 6 hours before turning on. It should remain horizontal during operation, with a tilt angle less than 5° for long-term running and less than 45° for short-term running.

Maintenance Features

Cleaning:
- Disconnect power before cleaning.
- Use a wet cloth to clean and dry the device.
- Remove the cover and drain from the bottom hole for thorough cleaning.
- Do not soak the device in water or wash it directly.
- Avoid abrasive cleaning agents.
- WARNING: Never use hard or sharp tools to remove ice or loosen frozen objects to prevent damage to the refrigerant circuit.
Storage (for long periods of non-use):
- Turn off power and remove the plug.
- Remove all stored items.
- Remove the cover and drain from the hole, wipe off excess water.
- Leave the lid slightly open to prevent odor formation.
- Store in a cool, dry place.
Defrosting:
- Regularly defrost the device to maintain cooling performance, as humidity can form frost.
- Switch off the device.
- Take out contents.
- Keep the lid open.
- Remove the cover and drain from the hole.
- Wipe off defrosted water.
Troubleshooting: The manual provides a comprehensive troubleshooting guide for common issues such as the refrigerator not working, compartments being too warm or food being frozen, unusual noises, water drops, and error codes (F1-F7/FS). Suggested remedies include checking connections, adjusting settings, restarting the device, or contacting the manufacturer for service.
Repairs: Repairs should only be carried out by qualified personnel. The lamp and supply cord must be replaced by the manufacturer or qualified persons.
Disposal: Due to the flammable refrigerant and blowing gas, comply with local regulations for disposal.