Do you have a question about the Braun Century NCL Series and is the answer not in the manual?
Brand | Braun |
---|---|
Model | Century NCL Series |
Category | Lifting Systems |
Language | English |
Process warranty/registration cards for lift activation and record keeping.
Record lift identification info from tags for claims or parts orders.
Adjust platform angle for balance between positions for Millennium NL Series lifts.
Angle outboard end down slightly for Century NCL/Vista NVL Series lifts.
Installations with base plate wedges require more platform angle adjustment.
Ensure both stop blocks make full contact with vertical arms for proper operation.
Diagnostic codes help resolve lift platform floor position setting problems.
Scrolling numbers indicating sensor or switch activation, not error codes.
Numbers indicating problems, accompanied by audible/visual alarms.
Numbers indicating lift operation and platform position.
Steps to diagnose lift failures using LCD screen codes and voltage checks.
Visual guide showing lubrication points and recommended lubricants for lift components.
Procedures for inspection and lubrication at 750 cycle intervals.
Procedures for inspection and maintenance at 1500 cycle intervals.
Procedures for inspection and maintenance at 4500 cycle intervals.
Repeat previous inspection, lubrication, and maintenance at 750 cycle intervals.