Additional lens filters (LF 40) are available at most stores carrying Braun ThermoScan.
Replacing the batteries
The thermometer is supplied with two 1.5 V type AA (LR 06) batteries. For best performance, we recommend Duracell®
alkaline batteries.
1. Insert new batteries when the battery symbol appears on the display.
2. Open the battery compartment. Remove the batteries and replace with new batteries, making sure the poles are in the
right direction.
3. Snap battery door into place.
To protect the environment, dispose of the product and empty batteries at your retail store or at appropriate collection
sites according to national or local regulations.
Calibration
The thermometer is initially calibrated at the time of manufacture. If this thermometer is used according to the use
instructions, periodic re-adjustment is not required. If at any time you question the accuracy of temperature measurements,
please contact Consumer Relations.
FOR CANADA ONLY:
Manufacturing date is given by the DATE CODE number located inside the battery compartment. The first three (3) digits
after DATE CODE represent the Julian date that the product was manufactured and the next two (2) digits represent the last
two numbers of the calendar year the product was manufactured. The last identifiers are the letters that represent the
manufacturer.
An example: DATE CODE 11614KTC, this product has been manufactured on the 116th day of the year 2014.
Errors and troubleshooting
Error message Situation Solution
To Next Page
Loading...
