Operation Notes and Details
the event of platform drift.
Due to the “all-hydraulic”
operation of the dual-cylinder
NL955, hydraulic fluid expan-
sion, contraction or seepage
may occur. Any of these
conditions may result in plat-
form drift (failure to hold the
platform in the folded or raised
position). Platform drift may
occur during lift shipment and/
or between extended periods
of non-lift use.
In the event that the platform
does not unfold when the UN-
FOLD switch is pressed, press
the FOLD switch momentarily
to disengage the Lift-Tite
™
latches (platform drift has
occurred). Then, press the
UNFOLD switch to unfold the
platform to floor level (stan-
dard operation). When manually
operating a lift equipped with
Lift-Tite
™
latches, insert the pump
handle in the pump and stroke un-
til the platform folds fully (stops).
Then, open the hand pump valve
(turn counterclockwise) to unfold
Disengaged
Lift-Tite
™
Latch
Latch
Engagement
Pin (Roller)
the platform. Folding the plat-
form fully first will ensure that the
Lift-Tite
™
latches will disengage
properly when the release valve
is opened. Manual Operating In-
structions are provided on pages
37-39.
Page 19
To Next Page
Loading...
