Page 23
Operation Notes and Details
barrier (when DOWN switch is
activated). See photos A and B.
The belt and chain driven side
entry is powered by the barrier
cylinder to automatically fold (ro-
tate) to the vertical position when
the UP switch is activated.
Outer Barrier Latch: A spring-
loaded latch engages the outer
barrier when the barrier rotates
upward from ramp position to
the vertical position (UP switch
is activated to raise the platform
above ground level).
Note: The platform must raise
approximately three inches be-
fore the latch engages fully (see
photo C on page 22).
The latch disengages the barrier
when the platform lowers fully
Discontinue lift use
immediately if any lift
component does not
operate properly.
Failure to do so may
result in serious
bodily injury and/or
property damage.
Interlock: The outer barrier
senses weight to prohibit lift
operation if occupied.
Side Entry: When the platform
lowers fully to ground level, the
spring-loaded side entry unfolds
(rotates) to the ramp position
simultaneously with the outer
(reaches ground level) and the
latch foot contacts the ground
(latch raises above the barrier).
The lift operator or attendant must
be certain the entire platform
reaches and rests safely on the
ground.
To Next Page
Loading...
Need help?
General
