Open
(Down)
Close
(Up/Stop)
E
Using hand pump handle:
a. Place slotted end of pump
handle onto back-up pump re-
lease valve and turn clockwise
to close securely. See Photo D.
Note: Valve must be tight, but
do not overtighten.
b. Insert handle into back-up pump
and stroke until platform reaches
floor level (see Photo E).
To Fold Platform (In):
Insert handle into back-up pump
and stroke until platform stops
(folds fully). See Photo E.
Manual Operating Instructions
D
Refer to photos and illustration of
release valve on page 37.
Note: Close back-up pump
release valve securely before
operating electric pump. Store
pump handle in clamps shown
in Photo B on page 38.
Up (To Raise):
Page 39
To Next Page
Loading...
