8
Take temperature
Press the temperature button (you can press and
hold the button or press and release it). When the
device is placed correctly, the screen displays a
dashed line animation while it takes a reading. After
the animation sequence (under 2 seconds), the
display shows the temperature. The appropriate fever light color is
displayed on the screen and the confirmation beep is heard.
If the device is positioned too far away from
the forehead, it will prompt you to move closer by
displaying a diagram and the letters “0-5 cm”. Slowly
move the device toward the forehead until the dashed
line animation starts and a reading is displayed.
4
5
Read temperature
Remove the device and read the
temperature.
For low (no backlight) and acceptable
(green backlight) temperature range, you
will hear a single long beep for 2 seconds. For moderate fever
(yellow backlight) and high fever (red backlight) temperature range,
you will hear 10 short beeps.
To repeat
Go to step 3.
6
To turn off
Press the power button to turn off. Device will also shut off
automatically after 60 seconds of no use.
To Next Page
Loading...
Need help?
General
