EasyManuals Logo
Home>Braun>Thermometer>NTF 3000

Braun NTF 3000 User Manual

Braun NTF 3000
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
12
Errors and troubleshooting
Situation
When 20% of battery life
is left, the display flashes
the low battery warning
symbol, however, the
device can still work
until the battery life has
0% left.
If the steady battery icon
is the only symbol shown
on the display, the device
cannot work. The battery
should be replaced
immediately.
This message displays
when measured
temperature is lower than
34.4°C or higher than
42.2°C or when the room
temperatrure is outside
the operating range of
15°C-40°C.
Blank display.
Thermometer
does not have power.
Error message Solution
Replace battery.
Replace battery.
Make sure the
protective cap is
removed. Re-measure
the temperature again,
carefully following the
instruction in “How to
use” section.
Please check if the
battery has been loaded
correctly. Also check
polarity (<+> and <–>)
of batteries.
Contact customer
service if thermometer
still does not function.

Other manuals for Braun NTF 3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Braun NTF 3000 and is the answer not in the manual?

Braun NTF 3000 Specifications

General IconGeneral
BrandBraun
ModelNTF 3000
CategoryThermometer
LanguageEnglish

Related product manuals