Braun Sensian 7 - Temperature Taking Hints

5
English
Temperature taking hints
It is important to know each individual’s normal temperature when they are well. This is the only
way to accurately diagnose a fever. Take multiple readings when healthy to determine normal
temperature.
Be sure to note this unit reads 0.5 °C (0.9 °F) lower than a rectal digital measurement.
An individual must be in the same ambient temperature for 30 minutes before taking a
measurement.
Note: The thermometer and individual should be in the same ambient temperature
for at least 10 minutes.
Always hold the thermometer and the forehead steady when taking a reading. DO NOT move the
thermometer until you hear the nal beep.
Nursing mothers should not take a temperature measurement on themselves or have their
temperature measured by another individual while or immediately after nursing a baby, as nursing
can aect body temperature.
Individuals should not drink, eat, or be physically active before/while taking the measurement.
Remove hats and wait 10 minutes before taking a measurement.
Before taking a measurement, remove dirt or hair from the forehead area. Wait 10 minutes after
cleaning before taking measurement.
ALWAYS take the temperature exactly as directed. Temperature results may vary if positioned in
the wrong location.
For individuals measuring their own temperature, it is recommended to use the “touch” option
instead of “no touch.”
In the following situations it is recommended that three temperatures in the same location be
taken and the highest one taken as the reading:
• Newborn infants in the rst 100 days.
• Children under three years of age with a compromised immune system and for whom the
presence or absence of fever is critical.
• When the user is learning how to use the thermometer for the rst time until he/she has
familiarized himself/herself with the instrument and obtains consistent readings.
General precautions:
• Remove any sweat with a dry cloth prior to measurement.
• Avoid any cooling or warming cloths on the forehead for at least 30 minutes prior to
measurement.
• Remove blankets and pillows away from the head and face prior to measurement.
• DO NOT take temperature measurements over scar tissue, open sores, or abrasions.
• Keep the measurement sensor and lens clean. Avoid directly touching the sensor or lens.
• ALWAYS store the thermometer with the protective cap in place to prevent dirt and scratches
from damaging the device.
• Make sure to remove the protective cap before taking a measurement and to put the cap back
on after using the thermometer.