6
How to use your Braun Sensian™ 7 thermometer
Note: The thermometer and individual should be in the same ambient temperature for at
least 10 minutes.
1
Remove protective cap
2
Power on
Press and release the power button once. Backlight will
come on and the start-up sequence begins.
NOTE: Make sure to remove the protective scanner cap
before taking a measurement.
3
Select age range
Select age with Age Precision
™
Technology button.
Device will start cycling through the age ranges, highlighting the 3 ranges you
may select; 0-3 months (
), 3-36 months ( ), or 36+ months ( ).
Press the Age Precision
™
Technology button to toggle through the age ranges
until you select the age appropriate for the individual.
3.1 To set a preferred age range: (Locking an age setting)
To save a preferred age range, so that the preferred age range will be
automatically selected when the thermometer is turned ON, follow these
steps:
A. Make sure the thermometer is OFF.
B. Press and hold the power button (
) and Age Precision
™
Technology
button (
) for 4 seconds. The unit will turn on, displaying a yellow
backlight and the 3 age range icons will ash.
C. Press the Age Precision
™
Technology ( ) button. The age range selected
will ash. Press the Age Precision
™
Technology button until your desired
age range is ashing on the display.
D. Once the desired age range is selected, stop pressing the button and wait
3 seconds. The green backlight will illuminate, and the selected age range
will turn solid. After 4 seconds, the thermometer will turn o.
E. The preferred age range will be automatically selected when the thermometer
is turned ON.
To Next Page
Loading...
