To Next PageTo Next PageWhy aren't the power bars lighting up on my Braun Silk expert 3 Epilator?
If the power bars on your Braun Epilator don't light up when the treatment window is placed on the skin, ensure the device is connected to an electrical outlet and in Ready mode. Also, make sure both skin tone sensors are in full contact with the skin. If necessary, reposition the device to ensure both skin tone sensors make skin contact.
What to do if my Braun Epilator is broken or cracked?
If your Braun Epilator appears broken, cracked, or defective, immediately stop using it. Do not use the device or power supply if damaged. If you have any doubts about its safety or suspect damage, refrain from using it.
Why is the first LED on my Braun Epilator flashing red?
If the first LED on the power bars of your Braun Epilator flashes red, it means the removable treatment window reflector has been taken off. Replace it to resolve the issue.
Why is only the first LED on my Braun Silk expert 3 illuminating red?
If only the first LED illuminates red on the power bar of your Braun Epilator, it indicates an invalid skin tone reading. This means your skin is either too light or too dark. For safety reasons, the device cannot be activated in this case.
Why doesn't my Braun Epilator work on small areas?
If your Braun Epilator doesn’t work on small areas, it's because both skin tone sensors must be in contact with the skin. If the area is too small or curved, no valid skin tone can be read, and the device won't activate. Reposition the device to ensure both sensors make contact.
Why are all the white LEDs flashing on my Braun Epilator?
If all the white LEDs on your Braun Epilator are flashing, it indicates the end of the product's lifetime. The maximum number of flashes (250,000) has been reached.
What does it mean if my Braun Silk expert 3 shows a red LED with white LEDs on the power bars?
If the power bars on your Braun Epilator show one red LED shining along with individual white LEDs, this indicates a device error. Try removing and replacing the power supply connection. If the error persists, contact a Braun Service Centre for repair.
General| Technology | IPL (Intense Pulsed Light) |
|---|---|
| Skin Tone Sensor | Yes |
| Flash Intensity Levels | 3 |
| Flash Lifespan | 300, 000 flashes |
| Corded/Cordless | Corded |
| Purpose | Hair Removal |
| Treatment Areas | Body, Face |
| Attachments | Precision head |
Provides an overview of the Braun Silk-expert device components and features.
Explains the IPL technology and mechanism for hair removal.
Lists conditions where the device should not be used, including skin tone restrictions.
Details areas and conditions to avoid for safe operation of the IPL device.
Outlines user restrictions and handling guidelines for safe device usage.
Advises on electrical hazards, proper power supply use, and fire risks.
Instructions on preparing the skin, powering on, and automatic skin tone reading.
Details Gliding, Precision, and Gentle modes for effective hair removal.
Specific instructions for treating facial areas, including upper lip and chin.
Recommended schedule for start-up and maintenance treatments for optimal results.
Post-treatment recommendations for skin care and sun protection.
Instructions for cleaning, maintaining, and storing the IPL device.
Describes potential skin reactions during and after IPL treatment.
Helps resolve common issues encountered during device operation.
Information on product disposal and warranty coverage.
