How to fix Braun Silk-expert Pro 5 PL5223 power bars not lighting up?
If the power bars on your Braun Epilator do not light up when the treatment window is placed on the skin, ensure the device is properly connected to an electrical outlet. Then, press any button (4 or 5) to activate it. Make sure that both skin tone sensors are in full contact with your skin. If necessary, adjust the device's position to ensure both sensors make skin contact.
How to use Braun Silk-expert Pro 5 PL5223 on small areas?
To use the Braun Epilator on small, hard-to-reach areas, use the precision head* (12) (*if available). Ensure that both skin tone sensors are in contact with the skin.
What to do if my Braun Silk-expert Pro 5 PL5223 Epilator is broken?
If your Braun Epilator is broken, cracked, or appears defective, do not use it if the handle, base station, or mains cord is damaged. If you have any doubts about its safety or suspect damage, refrain from using the device.
What to do if Braun Epilator power bars show an unfamiliar pattern?
If the power bars on your Braun Epilator display an unusual pattern of one red LED alongside individual white LEDs, this indicates a device error. In this case, the device will not operate. Try unplugging it and then reconnecting it. If the error continues, contact a Braun Service Centre for repair.
Why is the first LED on my Braun Silk-expert Pro 5 PL5223 Epilator flashing red?
If the first LED on the power bars of your Braun Epilator flashes red, it means that the head (10, 11, 12) has been taken off. Re-attach it to resolve the issue.
Why are all white LEDs flashing on my Braun Silk-expert Pro 5 PL5223?
If all the white LEDs on your Braun Epilator are flashing, this indicates that the product has reached the end of its lifetime. The maximum number of flashes (400,000) has been reached.
What to do if the gentle mode light is flashing on my Braun Epilator?
If the centre gentle mode light is flashing on your Braun Epilator, the device has been deactivated. To re-activate it, simply press any button.
Why does only the first LED illuminate red on my Braun Silk-expert Pro 5 PL5223 Epilator?
If only the first LED illuminates red on the power bar of your Braun Epilator, this indicates an invalid skin tone reading. Your skin may be either too light or too dark for the device to operate, and it will not flash.
Why is my Braun Silk-expert Pro 5 PL5223 flashing sequence slowing down?
If the flashing sequence on your Braun Epilator slows down, it means the device is in heat-protection mode. To restore normal speed, allow the device to cool down.
To Next Page
General